Maintenance Of Vacuum Pump Parts

1.Vacuum Pump Parts From Chinashould be installed in a clean and clean environment. It should not be contaminated with dust, water, water and high temperature.

2. For the first time installation of the vacuum pump, check whether the motor is rotating forward, that is, the motor is in the same direction as the rotor inside the pump. Generally, the motor is marked with the normal running direction of the motor.

3. Before starting the vacuum pump for a long time, the vacuum pump should be started several times intermittently.

4. After using the Vacuum Pump Parts, the vacuum pump should be placed

5. When the vacuum pump is running, the oil temperature should not be higher than 90 degrees. If the cause of the malfunction, please contact the vacuum pump manufacturer immediately.

6. If the vacuum pump has potential dangers such as inhalation of impurities, dust, moisture, chemicals, etc., a precision filter should be installed at the inlet of the vacuum pump. If the amount of impurities, dust, and water is too large, a piggy bank must be installed for filtration. To prevent impurities such as dust and moisture chemicals from entering the vacuum pump

7. If the vacuum pump needs to run for 24 hours, the vacuum pump must be repaired and repaired every six months.

8. During the normal operation of the vacuum pump, the vacuum pump oil in the pump should be kept below the oil mark line. It should be mixed with different grades and models of vacuum pump oil when refueling at 2/3 of the oil mirror.

9. The vacuum pump oil should be replaced regularly. Generally, it should be replaced once every 3~6 months. If the pump oil is found to be emulsified or carbonized, the special oil for the vacuum pump should be replaced in time.